How to clean a fabric acoustic panel, step by step according to the fabric type

Quick answer: to clean a fabric acoustic panel, vacuum it regularly and remove stains as soon as they appear, using a clean, well-wrung-out cloth, lukewarm water (maximum 30 °C) and soap. Always test first on an out-of-sight area. From there it depends on the fabric: ILUCS (Trevira CS polyester) allows dry cleaning, steam from a distance, alcohol and diluted bleach; IZZER (merino wool) allows dry cleaning and steam from a distance, but no bleach or direct steam. Mineral foam without fabric should be vacuumed and stains should be dabbed with a well-wrung-out damp cloth, because when wet it loses absorption.
Everything that follows comes from the ISINAC cleaning and maintenance guide. We do not add external tricks: clean only with what is included in the guide.
How often should a fabric acoustic panel be cleaned?
There is no fixed date: the guide recommends vacuuming it regularly. Accumulated dust and dirt wear out the fabric prematurely and fill the pores in the foam. If the room has a lot of dust, see below how to prevent it from getting dirty.
What applies to any fabric?
- Vacuum the fabric regularly so that dust and dirt do not accumulate.
- Act quickly on stains: remove excess liquid before it soaks into or stains the fabric.
- If necessary, use special soap for textiles, or lukewarm water (maximum 30 °C) with liquid soap.
- Always use a clean cloth and do not use excess soapy water: do not soak the fabric.
- Let the fabric dry before touching it again.
- First of all, perform a test on an inconspicuous area.
How do you clean a panel with ILUCS?
ILUCS is 100% Trevira CS polyester and is the fabric that supports the most cleaning methods:
- Dust: regular vacuuming.
- Small stains: lukewarm water and soap, with a clean, well-wrung cloth, and let dry.
- Deep cleaning: dry clean or steam. Steam should always be applied from a distance and kept in motion, without resting the nozzle on the panel.
- Alcohol disinfection: 75% alcohol disinfectants, in spray or wipes, can be used with Trevira CS.
- Bleach disinfection: household bleach, always diluted and following the manufacturer's instructions. Wet a cloth in the solution, wring it out, clean gently and let dry. Test first on an inconspicuous area.
- Cover: if the fabric is on a removable cover, ILUCS can be machine washed at 30 °C.
And what the lab says about ILUCS when washed: the color holds up and the fabric barely changes dimensions.
| ILUCS test (AITEX 2026AU1203) | Result |
|---|---|
| Colour fastness to washing at 30 °C (EN ISO 105-C06) | 5 (very good - excellent) |
| Color fastness to rubbing, dry and wet (ISO 105-X12) | 5 (very good - excellent) |
| Dimensional change after 3 washes (EN ISO 5077) | −1.0 % lengthwise and 0.0 % widthwise |
| Fastness rating scale | From 1 (very poor) to 5 (very good - excellent) |
How do you clean a panel with IZZER?
IZZER is virgin merino wool. Wool is a natural fiber and requires more care with water and products:
- Dust: regular vacuuming.
- Stains: lukewarm water (maximum 30 °C) and liquid soap, with very little water. Clean and well-wrung panel: the guide insists on not soaking the wool.
- Deep cleaning: dry cleaning.
- Bleach: never. Not used with natural fibers like wool.
- Steam: never directly on the wool.
Which products can I use on each fabric?
| Product or method | ILUCS (Trevira CS polyester) | IZZER (merino virgin wool) |
|---|---|---|
| Warm water (maximum 30 °C) and soap | Yes | Yes, using very little water |
| Dry cleaning | Yes | Yes |
| Steam, at a distance and in motion | Yes | Yes, but never directly on the wool |
| 75 % alcohol (spray or wipes) | Yes | The guide does not cover it for wool |
| Diluted household bleach according to its manufacturer | Yes | No |
| Washing machine | Yes, at 30 °C, provided the fabric is part of a removable cover | The guide does not cover it for wool |
Why always keep the steam at a distance? Because at the nozzle the steamer reaches temperatures of around 180 °C and pressures of up to 150 psi (about 10 bar). Resting on the panel, the fabric would heat up far above the lukewarm water used for its cleaning (maximum 30 °C) and the foam's limit:
| Guide limit | Value |
|---|---|
| Water for the fabric | Lukewarm, maximum 30 °C |
| Mineral foam (warranty condition) | Do not expose it to over 100 °C for more than 5 hours |
| Steamer nozzle | Around 180 °C and up to 150 psi (approx. 10 bar) |
| Alcohol for ILUCS | At 75% |
| Heat sources near the panel | Best kept away from temperatures above 45 °C |
How do you clean mineral foam without fabric?
Exposed mineral foam panels in WHITE or GREY finishes do not feature fabric covering. Foam is a highly porous material, which dictates its maintenance requirements:
- Vacuum it regularly so that dust does not clog its pores.
- Small stains: damp white cloth with soap and water. Wring out the cloth well before touching the foam: if it gets wet, it loses absorbent properties.
- Do not place it near machinery or drafts (false ceilings, doors, windows): it acts as a filter and traps particles.
- No intense heat: to maintain the warranty, no more than 100 °C for more than 5 hours. Therefore, no steam from up close.
- The GREY foam with adhesive is suitable for all types of environments except Turkish baths and rooms cleaned with direct water by mechanical means. The WHITE one is also unsuitable for swimming pools and humid environments. Suitability for humid environments does not mean it can get wet: direct water strips away its absorption.
How do I prevent the panel from getting dirty?
- Place it away from sources of dust and dirt.
- If you know there will be dust or dirt, it is better to use a removable, washable ILUCS cover.
- Keep it away from heat sources exceeding 45 °C.
- Keep exposed foam away from air currents.
- Choose the panel and fabric according to the room: they are categorized by location, starting with Walls.
What cleaning can alter
Our fabrics are made to withstand regular cleaning. Even so, the guide warns that cleaning can affect three things, depending on how often it is done: color, which may fade; fabric, which may weaken; and its fire behavior. Therefore, it is advisable to follow the guide and not clean more than necessary.
And what the warranty does not cover: damaging cleaning, poor maintenance, or failing to clean the panel.
Frequently asked questions
Can I put the panel cover in the washing machine?
With ILUCS, yes, if the cover can be removed: washable at 30 °C. In the AITEX test, after 3 washes ILUCS changed −1.0 % lengthwise and 0.0 % widthwise. For IZZER, the guide does not cover machine washing.
Can I use steam on an IZZER panel?
Yes, always at a distance and in continuous motion: never apply direct steam to the wool. Dry cleaning is also suitable.
Can a sound-absorbent panel be disinfected?
With ILUCS, yes: 75 % alcohol spray or wipes, or diluted household bleach according to its manufacturer, always with a wrung-out cloth. With IZZER, never bleach.
What happens if the mineral foam gets wet?
It loses absorbent properties. Therefore, stains are treated with a well-wrung damp cloth, never with direct water.
Where can I see the characteristics of each fabric?
- ILUCS: colors, composition, and tests, including the washing test.
- IZZER: merino wool, with its tests.
- Do you have questions about your panel? Write to us with a photo.
Tags: sound absorption
/noticias/como-limpiar-panel-acustico-tela/